Language · EN

MS-30 vs MS-35

Two sizes of the same frame. The difference that decides the order is usually aisle width or the weight of a full pallet — not the number on the plate.

MS-30MS-35
ModelMS-30MS-35
Rated capacity3 t3.5 t
Battery48 V / 600 Ah lead-acid or 48 V 400 Ah Li-ion80 V / 500 Ah lead-acid or 80 V 400 Ah Li-ion
Lift height3,000 mm standard; 4,500 / 6,000 mm optional3,000 mm standard; 4,500 / 6,000 mm optional
Turning radius2190 mm2285 mm
Length3620 mm to fork face3715 mm to fork face
Width1140 mm1230 mm
Operating weight4190 kg4580 kg
capacity0.5 t0.5 t
battery48 V / 400 Ah lead-acid or 48 V 280 Ah Li-ion48 V / 400 Ah lead-acid or 48 V 280 Ah Li-ion
liftHeight3,000 mm standard; 4,500 / 6,000 mm optional3,000 mm standard; 4,500 / 6,000 mm optional
turningRadius1715 mm1715 mm
serviceWeight2240 kg2240 kg
length3145 mm to fork face3145 mm to fork face
width1140 mm1140 mm
tyreSolid rubber 6.50-10 (front) / 5.00-8 (rear)Solid rubber 6.50-10 (front) / 5.00-8 (rear)

Rows that differ are marked. Rows without a mark are identical on both builds.

Choose MS-30 when

Four-wheel, 3.0 t. The smallest truck in the range that comfortably handles a 1,200 mm pallet at a 600 mm load centre without derating.

The building is the constraint: floor loading, door width, or a mezzanine that will not take the heavier chassis. MS-30 is also the cheaper unit, so a fleet that never loads to the plate should not pay for the frame it does not use.

MS-30 specification

Choose MS-35 when

Four-wheel, 3.5 t. Bought for brick, block and bagged material where the pallet is short but heavy.

The load is the constraint: pallets that arrive over-weight, attachments that shift the centre of gravity forward, or a mast tall enough that residual capacity falls away at height. Buying one size up is cheaper than a second handling step.

MS-35 specification

Not sure which one

Send the aisle width, the load and the lift height. We answer with the model and the reason, not both brochures.