CPC(D)35 vs CPC(D)40Q
Two sizes of the same frame. The difference that decides the order is usually aisle width or the weight of a full pallet — not the number on the plate.
| CPC(D)35 | CPC(D)40Q | |
|---|---|---|
| Model | CPC(D)35 | CPC(D)40Q |
| Rated capacity | 3.5 t | 3.8 t |
| Engine | Yunnei 4JB1, 45 kW, Stage V | Yunnei 4JB1, 45 kW, Stage V |
| Lift height | 3,000 mm standard; 4,500 / 6,000 mm optional | 3,000 mm standard; 4,500 / 6,000 mm optional |
| Turning radius | 2865 mm | 2922 mm |
| Length | 4265 mm to fork face | 4322 mm to fork face |
| Width | 1330 mm | 1330 mm |
| Operating weight | 5520 kg | 5766 kg |
| capacity | 1.5 t | 1.5 t |
| engine | Xinchai C490BPG, 36.8 kW, Stage V | Xinchai C490BPG, 36.8 kW, Stage V |
| liftHeight | 3,000 mm standard; 4,500 / 6,000 mm optional | 3,000 mm standard; 4,500 / 6,000 mm optional |
| turningRadius | 2485 mm | 2485 mm |
| serviceWeight | 3880 kg | 3880 kg |
| length | 3885 mm to fork face | 3885 mm to fork face |
| width | 1230 mm | 1230 mm |
| tyre | Pneumatic 7.00-12 (front) / 6.00-9 (rear) | Pneumatic 7.00-12 (front) / 6.00-9 (rear) |
Rows that differ are marked. Rows without a mark are identical on both builds.
Choose CPC(D)35 when
3.5 t. Bought for container stripping where the load is dense and the floor is concrete.
The building is the constraint: floor loading, door width, or a mezzanine that will not take the heavier chassis. CPC(D)35 is also the cheaper unit, so a fleet that never loads to the plate should not pay for the frame it does not use.
CPC(D)35 specificationChoose CPC(D)40Q when
3.8 t on the 4 t frame. Bought when a 3.5 t truck is marginal but a full 4 t is more counterweight than the floor will take.
The load is the constraint: pallets that arrive over-weight, attachments that shift the centre of gravity forward, or a mast tall enough that residual capacity falls away at height. Buying one size up is cheaper than a second handling step.
CPC(D)40Q specificationNot sure which one
Send the aisle width, the load and the lift height. We answer with the model and the reason, not both brochures.