MSCET-5000 vs MSCET-7000
Two sizes of the same frame. The difference that decides the order is usually aisle width or the weight of a full pallet — not the number on the plate.
| MSCET-5000 | MSCET-7000 | |
|---|---|---|
| Model | MSCET-5000 | MSCET-7000 |
| Rated capacity | 5 t | 7 t |
| Lift height | 3,000 mm standard; 6,000 mm optional | 3,000 mm standard; 6,000 mm optional |
| Ground clearance | 300 mm | 300 mm |
| Length | 5150 mm | 5570 mm |
| Width | 2000 mm | 2120 mm |
| Operating weight | 8700 kg | 10500 kg |
| capacity | 3.5 t | 3.5 t |
| drive | Four-wheel drive, articulated or rigid frame | Four-wheel drive, articulated or rigid frame |
| liftHeight | 3,000 mm standard; 6,000 mm optional | 3,000 mm standard; 6,000 mm optional |
| groundClearance | 300 mm | 300 mm |
| serviceWeight | 7350 kg | 7350 kg |
| length | 4835 mm | 4835 mm |
| width | 1910 mm | 1910 mm |
| tyre | Pneumatic 12.00-16.5, aggressive tread | Pneumatic 12.00-16.5, aggressive tread |
Rows that differ are marked. Rows without a mark are identical on both builds.
Choose MSCET-5000 when
5.0 t four-wheel drive. For heavier site loads and for yards that flood: the ground clearance is the reason, not the capacity.
The building is the constraint: floor loading, door width, or a mezzanine that will not take the heavier chassis. MSCET-5000 is also the cheaper unit, so a fleet that never loads to the plate should not pay for the frame it does not use.
MSCET-5000 specificationChoose MSCET-7000 when
7.0 t. Bought for precast concrete and steel frame erection, where the load is heavy and the ground is never finished.
The load is the constraint: pallets that arrive over-weight, attachments that shift the centre of gravity forward, or a mast tall enough that residual capacity falls away at height. Buying one size up is cheaper than a second handling step.
MSCET-7000 specificationNot sure which one
Send the aisle width, the load and the lift height. We answer with the model and the reason, not both brochures.